產品介紹

Fire & Safety

火焰偵測器 Honeywell Fire Sentry flame detector Fire & Flame Detection

產品選項:

多光譜火焰探測器 FS24X QuadBand(tm) Triple IR Flame Detector
複合多光譜火焰探測器FS20X Multi-Spectrum IR/IR/UV Flame Detector
多光譜火焰探測器FS17X Multi-Spectrum TriBand IR Flame Detector
火焰探測器Fire Sentry FS System 10(tm) and FS10-R
FS7 IR/IR Fire Detection System
SS4 UV and UV/IR Flame Detectors
SS3 UV and UV/IR Flame Detectors
SS2 UV/IR Flame Detector
測試燈Test Lamps

各類型火災火焰偵測感應器

產業別應用 :
Airport Terminals and Hangars
Gas Collection and Compressor Buildings
Gas Processing and Storage
Isopropyl Alcohol Production and Storage

Liquid Paint Spray & Powder Coating Booths
LNG/LPG Processing, Storage and Distribution
Methanol/Ethanol Production and Storage
Offshore Drilling and Production Platforms
Petrochemical Product Pipelines and Pumping Stations
Semiconductor Clean Rooms
Semiconductor Wet Benches & Wet Chemical Stations
Tank Farms
Truck, Rail and Marine Loading/Unloading

特殊產品技術:

Ultraviolet Band
Visible Band
NearBand IR
WideBand(tm)
Multi-Spectrum

QuadBand(tm) Triple IR
TriBand IR
Electro-Optical
Digital

火焰离子侦测仪VOCs

火焰离子侦测仪 VOCs

工作原理:

GC-FID 氣相層析儀/火焰離子化偵測法(GC/FID)

功能:

vocs 監測揮發性有機物VOC分析監測

检测对象:

高黏性、高污染、高濃度之光電業
火焰离子侦测仪VOCs

極早期煙霧偵測設備 Fire Alarm Aspiration Sensing Technology (FAAST)

極早期火災預警系統(Very Early Smoke Detection Apparatus, VESDA) Fire Alarm Aspiration Sensing Technology (FAAST)

FAAST aspirating smoke detectors deliver highly accurate Very Early Warning Fire Detection and extensive communications capabilities to provide maximum control over challenging environments.

Multi-Spectrum UV/IR Electro-Optical Digital Fire and Flame Detectors

  • SS4-A UV/IR Digital Fire and Flame Detector
  • SS4-AS UV/IR Digital Fire and Flame Detector
  • SS4-AUV UV Digital Fire and Flame Detector
  • SS3-A UV/IR Digital Fire and Flame Detector
  • SS2-A & SS2-AN UV/IR Digital Fire and Flame Detector
  • SS2-AM & SS2-AML UV/IR Ultra-High Speed Digital Fire and Flame Detector
  • SS2-AH & SS2-AHD UV/IR Ultra-High Speed Digital Fire and Flame Detector
  • FT-2145 Test Lamp
  • FS2000 System with CM1-A Controller
Honeywell Analytics IAQ monitor integrates with building automation systems to improve indoor air quality and energy efficiency

Honeywell Analytics IAQ monitor integrates with building automation systems to improve indoor air quality and energy efficiency

Honeywell Analytics announces the launch of the IAQPoint—a low-cost, dual-beam Infrared indoor air quality (IAQ) monitor that measures carbon dioxide, temperature and humidity levels for demand-controlled ventilation (DCV) in office towers, schools and other large buildings.

The IAQPoint improves energy efficiency and indoor air quality through the DCV—while offering low-cost installation, multiple configuration options, threein- one sensor technology and interoperability with virtually all building automation systems.

The IAQPoint is designed for flexible, low-cost installation and trouble-free operation. It connects easily to virtually any building communication system, including BACnet, LonWorks, FLN and Modbus, through its array of analog and digital output configurations.

Sensors are configured and calibrated at the factory. The unit has a simple snap-and-slide mounting and requires little wiring and no additional electrical devices.

Honeywell Analytics IAQ monitor integrates with building automation systems to improve indoor air quality and energy efficiency

The IAQPoint's dual IR sensing technology offers better drift and temperature compensation for measuring ambient CO2 levels—and does this with one of the smallest enclosures of its kind. Temperature and relative humidity readings are measured at the tip of an antennaprobe that extends from the bottom of the unit.

Taking these measurements outside of the enclosure guarantees accurate, repeatable readings. If the application does not require temperature and relative humidity, a CO2 only version is also available.

The IAQPoint can be ordered with 4-20mA analog output or optional digital display. A duct mount version is also available when it is desirable to monitor incoming air from outside the building, or to conceal the unit from plain view.

Other options include a sealed protective cover for applications where breakage or vandalism is a concern.

 

極早期煙霧偵測設備 Fire Alarm Aspiration Sensing Technology (FAAST)

Honeywell IAQProbe Air Quality Monitor

Designed to operate in environments requiring reliable monitoring, the Honeywell IAQProbe air quality monitor is industry's most versatile portable air quality monitoring tool. The Honeywell IAQProbe air quality monitor simultaneously monitors four parameters: carbon monoxide, carbon dioxide, relative humidity, and temperature.

Ergonomically designed and user-friendly, the Honeywell IAQProbe air quality monitor delivers peak performance second to none. The instrument displays instantaneous readings on the easy-to-read LCD display. Available with datalogging capacity with a real-time clock, the Honeywell IAQProbe air quality monitor calculates and records STEL and TWA readings (more than 77 days of data stored). Additional features include: audible and visual alarms, easy one-button calibration and peak reading memory. A full line of accessories makes the Honeywell IAQProbe air quality monitor even more versatile.

The Honeywell IAQProbe air quality monitor comes complete with a universal power adapter, datalogger, and deluxe sofware. An optional carrying case is also available.